microIOC baseline
microIOC CosyIcon
microIOC Analog/Digital
microIOC BLM
microIOC LOCO
microIOC LOCO2
microIOC M-Box-PMAC
microIOC M-Box-light
microIOC LR-BPM
microIOC MX-BPM
microIOC CosyEye
MEM - Machine Efficiency Monitor
microIOC Development Environment
Remote control of instrumentation devices.
microIOC Cosy Instrumentation control a complete solution for controlling devices via serial or parallel interfaces and integration of these devices into higher-level network or control system.
microIOC CosyIcon comes in different variants:
microIOC CosyIcon comes in different variants:
- RS232/485 with up to 24 serial communication ports. microIOC CosyIcon extended with serial interfaces provides efficient means for remote control of your devices and your laboratory equipment.
- GPIB, where up to 3 separate GPIB ports can be provided. Serial, star or mixed connection topology can be used if more devices are to be connected to a single microIOC. Up to 32 devices can be connected to one GPIB port.
- custom combination of serial, parallel or GPIB communication ports
Key features
- customized back-panel interfaces for direct connection of various instrumentation, acquisition systems, actuators, etc.
- modular: additional inputs/outputs (serial, analog, digital, etc…)
- software: Linux OS or RTEMS, application specific software, web-based configuration, monitoring and control
- customizable: supported up to three standard GPIB (IEEE488) interfaces and up to 24 serial (RS485/232) ports
- optional RJ45 (Ethernet-like) connectors for serial communication with traffic indication LEDs. Reduces installation and line debugging time (MTTF)
Benefits
- integrate serial, parallel or GPIB-interface devices into higher-level network or control system
- keep higher-level network or control system separate from network attached device (NAD) communication
- wide range of device protocol implementations and hardware drivers is available
- low cost per I/O channel
- small and robust enclosure enables mounting close to the controlled device (reducing cable lengths), enabling better communication and saving costs
Applications
| microIOC Cosy Instrumentation control | |
| microIOC control unit | |
| CPU | X86 compatible AMD GEODE GX1, 300MHz |
| interfaces | Dual 10/100 Ethernet, 2xUSB, RS232, VGA, |
| SW | Linux Debian or RTEMS, full control system integration (EPICS, ACS and Tango), drivers for extension cards |
| power supply | 110/220 V (50/60 Hz), 60 W, industrial grade, current protection |
| casing | Rack-mount 19" 2U case (88 x 430 x 200mm) |
| Desktop 12" 2U case (88 x 30 x 200mm) | |
| Desktop 8" 2U case (88 x 200 x 160mm) | |
| Interfaces | |
| GPIB ports | 1 per extension card (up to 3 extension cards per SBC) |
| RS232/422/485 ports | 8 per extension card (up to 3 extension cards per SBC) |
microIOC is manufactured by Cosylab
