microIOC baseline
microIOC CosyIcon
microIOC Analog/Digital
microIOC BLM
microIOC LOCO
microIOC LOCO2
microIOC M-Box-PMAC
microIOC M-Box-light
microIOC LR-BPM
microIOC MX-BPM
microIOC DelayGenerator
microIOC CosyEye
microIOC CosyScope
MEM - Machine Efficiency Monitor
microIOC Development Environment
Determine beam position. Quickly.
microIOC LR-BPM is a plug & play beam position monitoring solution. It is perfectly suitable for a quick position detection of single-pass bunches. Up to 8 channels of BPM pickup electrodes can be connected to and processed by this system.
microIOC LR-BPM system is a complete beam position monitoring solution, based on:
Up to 8 Bergoz LR-BPM modules and microIOC ADA unit are conveniently integrated into the Bergoz BPM-RFC/16 subrack.
operation principle and connection
Bergoz LR-BPM modules capture and process the beam pickup signals. Each LR-BPM module outputs two analog signals (vertical and horizontal). microIOC ADA unit digitizes and processes these analog outputs.
To synchronize with the beam transition triggered measurement is provided. Sampling is done with 16-bit resolution ADC cards with 8 differential inputs each, sampling at 250k samples/sec. Samples for each channel are averaged in order to filter out mains noise.
microIOC LR-BPM system is a complete beam position monitoring solution, based on:
- Log-Ratio Beam Position Monitors operating in Sample&Hold mode (LR-BPM-SH) and BPM-RFC/16 subrack from Bergoz as an analog front-end and
- microIOC analogue data acquisition (ADA) unit.
Up to 8 Bergoz LR-BPM modules and microIOC ADA unit are conveniently integrated into the Bergoz BPM-RFC/16 subrack.
operation principle and connection
Bergoz LR-BPM modules capture and process the beam pickup signals. Each LR-BPM module outputs two analog signals (vertical and horizontal). microIOC ADA unit digitizes and processes these analog outputs.
To synchronize with the beam transition triggered measurement is provided. Sampling is done with 16-bit resolution ADC cards with 8 differential inputs each, sampling at 250k samples/sec. Samples for each channel are averaged in order to filter out mains noise.
Key features
- complete monitoring with averaging of position signals from LR-BPM units (X, Y)
- 16-bit resolution sampling @250kHz
- sampling synchronization with Bergoz LR-BPM card built-in trigger or external trigger
Benefits
- turnkey solution for quick beam position monitoring – attach to the BPM pickup electrodes and read data in control system
- compact design; installed into single 3U high chassis
- no extra power supply required
www.bergoz.com
- beam position measurement of low repetition beam pulses
- LINAC, transfer lines, fast-cycling synchrotrons and boosters
- turn by turn parameters measurements (using single LR-BPM unit)
- measurement of the first turns of the reference synchrotron bucket (using single LR-BPM unit)
- single-pass short bunches beam position measurement
| microIOC LR-BPM system | |
| parameter | value |
| BPM-RFC/16 subrack | |
| chassis | conductive RF-shielded aluminum chassis |
| height: 3U | |
| sub-modules | microIOC ADA unit |
| 8 LR-BPM modules | |
| LR-BPM module | |
| type of measurement | non-interceptive |
| beam intensity range | >50 dB (single bunch 30pC...10nC) |
| repetition rate | up to 500 MHz |
| bunch distinguishing repetition rate | up to 5 MHz |
| beam band processing | L, S and X (bunch groups up to 3 ns) |
| width | 4 TE (21 mm) |
| power supply | supplied from microIOC ADA unit |
| microIOC ADA unit | |
| analog acquisition | 16-bit resolution, 250k samples/sec per channel, 2x8 differential analogue inputs |
| CPU | Embedded Intel® Ultra Low Voltage Celeron 400MHz |
| operating system | Linux Debian and RTEMS |
| control system support | EPICS, ACS and Tango |
| interfaces | 2 x 10/100 Mbps Ethernet, 2 x USB, RS232, VGA |
| power supply | 110/220 V (50/60 Hz), industrial grade, current protected |
| width | 42 TE (213 mm) |
microIOC is manufactured by Cosylab
